This new Rail Coping Sled by Rockler, ensures perfectly square coped rail ends with virtually zero tear-out for building cope-and-stick doors and drawer fronts.
Sled has a smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the fence, your rails will travel unwaveringly past the cutter for the cleanest, squarest cuts you can imagine.
Particularly with drawer fronts, which sometimes use very narrow rails, the sled prevents parts from dipping in too deep and keeps your hands safely out of harm's way.
A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the workpiece from wandering.
Unlike many jigs that use the miter slot, the Rockler sled uses only the fence as a reference, so there is no need to waste time aligning the miter slot parallel with the fence.
In addition, the coping sled is designed so the reference edge is a separate clear guide rail elevated 2'' above the table, meaning there is no risk of cutting into
the sled.
The smooth-sliding 3/8'' thick phenolic base stays rigid and flat when toggle clamp pressure is applied.
The toggle clamp features easy, tool-free adjustments and one-handed operation.
The clear, elevated guide runs against fence, offering a large, smooth-running edge without having to cut into the sled.
Includes a sacrificial block is easily replaceable to accommodate different profiles.
Maximum workpiece dimension is 5'' wide x 1-1/4'' thick.
If post is still up, it is still available.
Located in Blairsville GA or can meet somewhere convenient for us both.
Whatsapp
